Spoon Plastic Injection Molding Machine D150A
Basic Info
Model No.: D150A
Product Description
Plastic Injection Machine is suitable for using PET Preform Mold, Plastic Cap Mold, Plastic Bottle Mold, Plastic Cup Mold, Plastic Fork Mold, Plastic Spoon Mold, Preform Mold for Jars, Transportation Plastic Pallet Mold...
We can manufacture preform mold according to your demands, with more than 10 years experience and our injection machines have passed CE certificated.
Our Injection molding machine ranges from 90T-3000T, with high precision and rigidity, fast respons and energy efficiency.
1.The servo motor drives screw ball so to achieve machine prre-plasticizing and injection movement
2.Pre-plasticizing , backpressure , injection and holding pressure has realized full closed-loop numerical control , making injection repeat precision reach up to 0.01mm
3.The clamping structure consists of servo motor drives high precision fixed pump / hydraulic transmission
4.Overall machine movement is timely controlled and accurately run according to products processing technology
5.Servo system as well as well-matched high response controller has fully applied to machine cycle
6.Hybrid machine has been a popular alternative for full electric machine, which is applicable to ultra-thin-wall and high precision products processing
D series technical parameters
INTERNATIONAL CLASS NO. | | 150/358 | ||
SPECIFICATION | | D150A | ||
Screw type | | A | B | C |
Injection unit | ||||
Screw diameter | mm | 32 | 35 | 38 |
Screw L/D ratio | L/D | 23 | 21 | 19.3 |
Shot volume (theoretical) | CM³ | 136 | 163 | 192 |
Injection weight (PS) | g | 124 | 148 | 175 |
Injection rate | g/s | 222 | 265 | 312 |
Injection pressure | mpa | 262 | 219 | 186 |
Injection speed | mm/s | 300 | ||
Screw speed | rpm | 400 | ||
Clamping Unit | ||||
Clamping force | kn | 1500 | ||
Open stroke | mm | 380 | ||
Space between tie-bars | mm | 460*420 | ||
Max.mould height | mm | 450 | ||
Min.mould height | mm | 160 | ||
Ejector stroke | mm | 120 | ||
Ejector force | kn | 50 | ||
Others | ||||
Pump max. pressure | mpa | 16 | ||
Pump motor power (servo) | kw | 57.5 | ||
Heating power | kw | 12.3 | ||
Numbers of heating area | segment | 3+1 | ||
Machine dimension | m | 5.2*1.45*2.1 | ||
Oiltank cubage | l | 210 | ||
Machine weight | ton | 4.8 |
ALLWAY , Always on the way!
Product Categories : Injection Molding Machine > D Series Hybrid Servo Machine